KLL-Manual Ignition Gas Torch-7003D

Inkcazelo emfutshane:

KLL umbala otyheli iqhosha adjustable, umzimba ubhedu, ukuvutha ngesandla, iphuhliselwe kuphela ukusetyenziswa ngaphandle, nceda qiniseka ukuba ungayisebenzisi ngaphakathi buliding, izithuthi, ortens, njengoko kukho ingozi yokufa ngenxa yokuphefumla ngenxa yecarbon dioxide posisoning okanye oksijini ukunqongophala. .Naxa uyisebenzisa kwiminyango yethu kwiindawo ezimxinwa, qiniseka ukuba kukho umoya owaneleyo, iqondo lobushushu eliphakathi kwedangatye lifikelela kwi-1300 degrees.


Iinkcukacha zeMveliso

Iithegi zeMveliso

Ipharamitha

imodeli no. I-KLL-7003D
Umlilo Ukucima ngesandla
uhlobo lwe-coonection uqhagamshelwano lwebhayonet
ubunzima (g) 162
impahla yemveliso bras + zinc ingxubevange + iplastiki
ubukhulu (MM) 130x45x40
ukupakishwa 1 pc / blister ikhadi 10pcs / ibhokisi yangaphakathi 120pcs / ctn
I-Fuel butane
MOQ 1000 PCS
eyenzelwe wena OEM & ODM
Ixesha lokukhokhela 15-35days

Iinkcukacha zeMveliso

7003d (1)

PHAMBILI

7003d (2)

BUYELA

Umfanekiso weMveliso

7003d (6)
7003d (5)
7003d (3)
7003d (7)

1.Push cartridge yegesi kwisiseko kwaye ujike i-counter-clockwise ukuze ukhusele.
2.Musa ukunyanzelisa i-cartridge yegesi xa ufaka.

3. Vula iqhosha lokukhupha irhasi ngokunxamnye newotshi kancinci ukuze ukhuphe isixa esincinci serhasi kwaye ulayite i-CANON TORCH ngematshisi.

7003d (4)

 

 

 

4. Lungisa ubushushu bomlilo kwiimfuno zakho ezithile.Jika iqhosha lokukhupha irhasi kwiwotshi ukucima umlilo .Yisuse rhoqo ikhatriji yerhasi emva kokusetyenziswa .

 

 

 

Indlela yokusebenza

Umlilo
-Jika iqhosha ngokucothayo kwicala elifanelekileyo ukuqala ukuhamba kwerhasi emva koko ucinezele i-tridge ngaphakathi de icofe.
-Ukuphinda kweyunithi kuyasilela ekukhanyeni

Sebenzisa
-Isixhobo ngoku sikulungele ukusetyenziswa.Lungisa idangatye phakathi”-“ kunye no “+”(ubushushu obuphantsi nokuphezulu) njengoko kufuneka.
-Kulumkele ukuvutha okunokwenzeka ngexesha lemizuzu emibini yokufudumala kwaye ngexesha apho isixhobo kufuneka singajongi ngaphezu kwe-15 degrees ukusuka kwindawo eme nkqo (phezulu).

Ukuvala
-Vala unikezelo lwerhasi lucime ngokupheleleyo ngokujika iqhoshana lokulawula irhasi kwicala elithi “clockwise”(“-”)ndlela.
-Yahlula isixhobo kwikhatriji yegesi emva kokusetyenziswa.

Emva kokusetyenziswa
-Jonga ukuba isixhobo sicocekile kwaye somile.
-Gcina kwindawo epholileyo, nengena umoya kakuhle emva kokwahlula ikhatriji kwisixhobo kunye nokutshintsha ikepusi.

ISICELO SEMVELISO

Umboniso

Isatifikethi

UKhenketho lwasefektri

Ngaphandle

EzoThutho kunye nokuGcinwa kwezinto


  • Ngaphambili:
  • Okulandelayo:

  • Iimveliso ezinxulumeneyo